5TI-103 Series	6MT 1/0
	Tip 1 ...   Fit exact replacement parts.  DO NOT replace a 5TI-1032 or 5TI-1032-1 with a 5TI-1032-2.as there are at least 4 different earthing schemes between I/O bases, 6MT I/O cable shielding, I/O expanders, and sequencers. Mismatch can cause earth loops and electrical noise problems, especially with 3rd party remote I/O systems  ......
Tip 2 ... Fit only our 2µA standby current expansion memory, giving 6000 hour standby with 4k memory and the original Eternacell Lithium battery (5TI-BATT). Lower cost memory can draw as high as 2mA/chip giving only 6 hours standby.
Tip 3 ... Fit new batteries every Christmas shutdown, (WITH POWER STILL APPLIED) or transfer operation to EPROM's if you want your machine to restart after every shut down. Even EPROM's die eventually so backup your valuable operating programs onto a spare EPROM set, send us the EPROM's and we will produce a hard copy printout plus 3.5" VPU disc.
Call: 01737-824600, or email for latest prices

Sequencers			Prices
Code	Description		Repair	Buy
5TI-1031 5TI-1031-1	5TI Sequencer - 1K word Read/Write and EPROM memory		email	email
5TI-1032 5TI-1032-1	5TI Sequencer - 2K word Read/Write and EPROM memory		email	email
5TI-1033 5TI-1033-1	5TI Sequencer - 3K word Read/Write and EPROM memory		email	email
5TI-1034 5TI-1034-1	5TI Sequencer - 4K word Read/Write and EPROM memory		email	email
5TI-MEM-1	1K expansion Read/Write memory for above sequencers (4 chips/1K). High specification chips, 2uA standby current for 6 months standby from 5TI-BATT		-	£50
5TI-1032-2	5TI Sequencer - 2K word Read/Write and EPROM memory		email	email
5TI-1034-2	5TI Sequencer - 4K word Read/Write and EPROM memory		email	email
5TI-MEM-2	2K expansion Read/Write memory (5TI-103x-2 style)		-	£100
Older 5TI-102 and 101 Sequencers
5TI-1023A	5TI Sequencer - 1K word Read/Write  memory		Replace with 5TI-1031
5TI-1029	5TI Sequencer - 1K word PROM  memory
5TI-101	5TI Sequencer - 256 word Read/Write or PROM memory
5TI-101/1029 PROM cards cannot now be re-programmed in the original 5TI PROM programmer because modern chips are the reverse state when blank to that of the original chips used in the Sequencers. Hence the programmer will not work.
Components			Prices
Code	Description	Hire	Repair	Buy
5TI-3200 5TI-3201	TCAM - Timer/Counter Access Module		email	email
35848-84	TCAM cable - 2m (7ft.)		-	email
5TI-2000 5TI-2001	Read/Write hand programmer	£75 for 2 weeks	email	email
VPU-200	VPU200 Video programmer	£200 for 2 weeks	email	email
5TI-4100	I/O simulator		email	email
5TI-5338 5TI-5339 5TI-5340	TIWAY NIM (network interface module) two local-line ports, two RS232c ports.		email	email
5TI-BATT	5TI battery - full original capacity with studs		-	£25
2532-EPROM	4k EPROM for older style 5TI (2 required/sequencer)		£50 ea
2516-EPROM	2k EPROM for older style 5TI (2 required/sequencer)		£35 ea
2716-EPROM	2k EPROM for -2 style 5TI and TI-100 (2 required/5TI sequencer)		£25 ea
5TI-KEY	5TI, TCAM and VPU key		£10 ea
©2003 Lamonde Automation Limited www.lamonde.com